Cranesmart Systems LMI System, User Manual

Page: 79 / 101

78 Cranesmart LMI Version R9
Display Timer
1. From the Top Menu screen, use the Up or Down arrows select System.
2. Use the Up or Down arrows, select Display Timer.
3. Use the Up or Down arrows, select Timer.
4. Use the Up or Down arrows to change Display Time.
5. Press Accept twice to save.
6. Use the Up or Down arrows to select Top Menu to continue with Supervisor permission, Back to return to System Menu, or Select Exit to
return to Primary Operating Screen and Operator Permission level.
Supervisor Enable/Disable Menu
1. From the Top Menu screen, use the Up or Down arrows and select Enable/Disable.
2. Use the Up or Down arrows, select the Auto Enable, Auto Disable or Manual.
3. Use the Up or Down arrows to select Top Menu to continue with Supervisor permission or, select Exit to return to Primary Operating Screen
and Operator Permission level.
NOTE:

For Auto Enable/Disable the system steps through the transducers in the system until all transducers have been located. Operators may have to wait
approximately 5 seconds for the system to connect to a transducer.

Auto Disable can only be used if a transducer is in a system or battery alarm

For Manual Enable/Disable use the Up or Down arrows to select the transducers to enable/disable. (Extra choice may be available under
– More)
Logger Menu
The Logger menu is used for setting up User PIN codes and enabling the PIN code function, as well as downloading
stored alarms.
Download
The download feature requires a cable and customised software purchased from
Cranesmart™ Systems. If you need to
download alarms but have not purchased a cable, please phone us at (888) 562-3222 or (780) 437-2986.
Please refer to instructions included with the
Cranesmart™ Alarms software and download cable.