70
Set the hold time at zero frequency in the transition between forward and reverse
running.It is shown as following figure
：
Fig.6-4 FWD/REV dead time diagram
Code
Name
Setting Range
F1.12
Action when running frequency is less than
lower frequency limit
0
～
1
【
0
】
This Code is used to determine the running state when the setting frequency is
lower than the lower frequency limit.
0:Running at the lower frequency limit
1:Running at zero frequency.Inverter will Running at zero frequency when the running
frequency is less than the lower frequency limit.When the reference frequency is higher
than or equal to the lower frequency limit again,the Inverter will automatic increase
frequency to run.
Code
Name
Setting Range
F1.13
Terminal detection selection when power is
on
0
～
1
【
0
】
