CARBURETOR
FL-9
Use a new sealing ring prior to mounting the float
chamber cover.
Mount the float chamber cover to the carburetor
body.
Fasten the choke cable and put in the throttle
control cable.
Mount the carburetor to the intake manifold and to
the suction hose of the engine air cleaner box.
Check the oil and the fuel line, the overflow tube
and the heating cable for damage and aging.
Connect all lines to the carburetor.
Adjust the throttle control cable.
Adjust the free play of the throttle control cable.
MIXTURE CONTROL SCREW
Carefully turn the screw clockwise to the stop and
then release it by 1-1.5 turns.
Pay attention not to damage the seat.
For the proper adjustment of the idle speed the
engine must have reached its operating
temperature.
Adjust the idle speed to 1800 min
-1
via the idle
adjusting screw.
Slightly turn the mixture control screw clockwise
or counterclockwise until the engine speed
declines.Then set the screw to the middle setting of
both positions.
Re-check the idle speed.
Turn the throttle grip and check whether the
correct idle speed is adjusted by itself.
If not, repeat the steps before.
Mixture control screw
Idling adjusting screw
Summary of Contents for SuperCross Series
