![background image](http://html1.mh-extra.com/html/cpi/supercross-series/supercross-series_service-manual_2675025078.webp)
ELECTRICAL SYSTEM
ES-6
SPEEDOMETER SETTING
Changing the wheel size
Mode button
Press down the mode button until the settings
for the wheel size are displayed. The wheel
size can be changed by short tappings on the
button. Save the setting by pressing down the
mode button for approx. 3 secs. After that, the
two measurement units for km/h and mph are
displayed, and the desired one can be selected.
Select the desired unit with a short tap on the
mode button. The measurement unit flashes
and will be set when the mode button is
pressed down for three seconds. When the
wheel size is changed, TD, LAP und AVE
values are automatically set back to zero.
If the wheel size menu is selected and
the wheel size is not changed for about
20 secs, then the display automatically
switches back to the start menu. The
factory adjustment of the wheel size is
1840.
HORN
Disconnect the plug connector from the horn.
Connect a voltmeter to the horn plug connection
and check whether voltage is applied. For this
purpose turn the ignition key to the “ON“
position and press the horn button.
If no voltage is applied, check the horn button
wires.
If a voltage can be measured, replace the horn.
Summary of Contents for SuperCross Series
