Cosen AH-250H, Instruction Manual

Page: 5 / 134

II
4 OPERATION INSTRUCTION
4.1 SAFETY PRECAUTIONS 4-1
4.2 PREPARATION FOR USE 4-1
4.3 CONTROLS DESCRIPTION AND OPERATION 4-2
4.3.1 Control panel 4-2
4.3.2 Manual model 4-8
4.4 TEST RUN THE MACHINE 4-15
4.5 HOW TO REPLACE THE SAW BLADE 4-16
4.6 HOW TO LOAD THE WORKPIECE 4-18
4.7 PROCEDURES TO STOP AN OPERATING PROCESS 4-19
4.8 PROHIBITED MEASURES ON THE MACHINE 4-20
5 ELECTRICAL SYSTEM
5.1 INTRODUCTION 5-1
5.2 ELECTRICAL COMPONENTS LAYOUT 5-1
5.3 ELECTRICAL CIRCUIT DIAGRAMS 5-2
6 HYDRAULIC SYSTEM
6.1 INTRODUCTION 6-1
7 BAND SAW CUTTING A PRACTICAL GUIDE
7.1 INTRODUCTION 7-1
7.2 BAND SAW BLADE SELECTION 7-1~3
7.3 Some Sawing Practices 7-4
7.3.1 Selection of Saw Pitch 7-4
7.3.2 Material Size and Saw Pitch 7-4
8 MAINTENANCE & SERVICE
8.1 INTRODUCTION 8-1
8.2 BASIC MAINTENANCE 8-1
8.3 MAINTENANCE SCHEDULE 8-1
Before beginning of work each day
8-2
After ending work each day 8-2
Every monthly maintenance
8-2
Every six months maintenance
8-3
8.4 STORAGE CONDITION OF THE MACHINE 8-3
8.5 TERMINATING THE USE OF THE MACHINE 8-4
8.6 OIL RECOMMENDATION FOR MAINTENANCE 8-5
9 SYSTEM TROUBLE SHOOTING
9.1 INTRODUCTION 9-1
9.2 PRECAUTION 9-1
9.3 GENERAL TROUBLES AND SOLUTIONS 9-2
9.4 MOTOR TROUBLES AND SOLUTIONS 9-3
9.5 BLADE TROUBLES AND SOLUTIONS 9-4
Page 5 Instruction Manual for AH-250H (B040) 04/12/2014