Cosen AH-250H, Instruction Manual

Page: 29 / 134

MOVING AND INSTALLATION
Section 3
3-7
3.3.4 Unpacking
z
After the machine has been properly positioned, remove the shipping bracket.
z
Unpack your machine carefully. Do not damage the machine surface paint.
z
Remember to remove the bracket used to lock the saw frame and the saw bed.
z
Remember used the wrench to lose the bolts of bracket the saw frame and saw bed.
z
Be sure to retain this bracket so that it can be used again in the event that your machine
must be relocated.
3.3.5 Equipment Furnished
Your machine has a set of tools to maintain machine to keep it running. Cutting ease and
efficiency can be maintained with proper care. We list the standard accessories and illustration as
follows :
1. Tool box 1 pc
2. Grease gun 1 pc
3. Screw drive (+, -) 2 pcs
4. Open end spanner 3 pcs
5. Hexagon wrench 1 set
6. Chip filings spade ( only manual type machine ) 1 pcs
7. Operation manual 1 pcs
3.3.6 Installation Procedure
Your machine is easier to install than other brand type. Following this manual, you can do it
yourself step by step. The major machine function setting up is as follows: six major steps are
Fixing the machine on the floor, Machine leveling, Installation of feed roller, Cutting fluid supply,
Hydraulic oil supply, and Electrical connection .
€
Fixing the machine on the floor
BRACKET
Page 29 Instruction Manual for AH-250H (B040) 04/12/2014