Cosen AH-250H, Instruction Manual

Page: 40 / 134

OPERATING INSTRUCTION
Section 4
4-7
2 Ration setting 0.001 ~9.999
3 One turn signal 1 ~ 9999cps
4 Sampling time 1 ~ 60sec
5 Select function 0:standard mode. 1:unit changing mode
6 Panel lock 0:Release. 1:Lock
Table 4-2 Reference number function
Parameter Setting Procedure
Press 3”PREST”+9“ENT” key
Press 3 “PREST” key
Press 4 “ Nb. Change” key
Press 5 “ + ” key
Press 10 ” – “ key
Press 3 “PREST” key to select
“6”
1sec
1sec
1sec
1sec
1sec
1sec
Entry to correction mode; The “Display Nb.” will flesh.
To select what “Reference Nb” you want to change.
To select fleas number for “increase mode”or“decrease
mode”
“ Increase mode” the numerical from 0 to 9
“Decrease mode”the numerical from 9 to 0
Press”+” the display number is change ”1” It mean is locking
all of setting parameters. If press “-“ It mean is release
locking function.So, user should change before setting
parameter.
DO NOT CHANGE ANY DATA BY USER.
Press 8 “SHIFT” key 1sec Change “DS1”[Millimeters system]
“DS2”[British system]
NOTE
:Entry to correction mode the display number will flesh, If operator is waiting time more
than 10 sec not change parameter numeric it should be return to origin, following
parameter setting procedure again.
Blade Tension Device
This device provides for adequate blade tension(with the aid
of the hydraulic cylinder). To provide the saw blade with
tension, turn the selector to “
”. Should the saw blade
be broken during operation, the safety device automatically
activates and stops all machine operation. The limit switch of
the safety device is reset by turning the blade tension
selector to “
“ position.
Page 40 Instruction Manual for AH-250H (B040) 04/12/2014