Corghi A 222, Operator'S Manual

Page: 79 / 314

Operator’s manual
A 222
79
Model Motor rating kW
Rotation
speed
rpm
Torque
Nm
Weight of electric/
electronic part kg
A 222 TI
A 222
400Volt/3ph 50Hz 0,75 8,5 1200 11,5
200/230Volt/3ph 60Hz 0,75 8,5 1200 11,5
200/230Volt/3ph 50Hz 0,75 8,5 1200 11,5
200/230Volt/1ph 50Hz 0,75 8,5 800 11,5
200/230Volt/1ph 60Hz 0,75 8,5 800 11,5
115Volt/1ph 60Hz 0,75 8,5 800 11,5
200/230Volt/1ph 50/60Hz DV 0,75 6-15 1200 10,2
115Volt/1ph 60Hz DV 0,75 6-15 1200 10,2
115Volt/1ph 60Hz DV cCSAus 0,75 6-15 1200 10,2
400Volt/3ph 50Hz DV 0.9/1,25 6-12 900 11,6
AIR MOTOR / 6,5 800 /
1.2.e. AIR PRESSURES
The machine is equipped with an internal pressure limiting valve to minimize the risk
of over inflating the tyre.
• EXPLOSION HAZARD
• Never exceed the tyre pressure recommended by the tyre
manufacturer. Never mismatch tyre size and rim size.
• Avoid personal injury or death
DANGER
1. Never exceed these pressure limitations:
• Supply line pressure (from compressor) is 220 psi (15 bar).
• Operating pressure (gauge on regulator) is 145 psi (10 bar).
Bead setting pressure (gauge on hose) is the tyre manufacturer’s maximum pressure as
stated on the sidewall of the tyre
2. Activate air inflation jets only when sealing the bead.
3. Bleed air pressure system before disconnecting supply line or other pneumatic
components. Air is stored in a reservoir for operation of inflation jets.
4. Only activate the air inflation jets if the rim securing device is locked in place and
the tyre is properly clamped (when possible).