High Speed Dome Camera Introduction Manual
25
▌
▌
IR LED
The user can open and close the IR LED manually and set up the IR LED
work mode under this OSD mean. (Under normal operation mode, the
user can press IRIS OPEN and IRIS CLOSE to adjust the IR LED power):
1.
CONTROL
MODE:
z
AUTO: IR LED will be opened or closed automatically according
to the light conditions.
z
TIMING: LED will be adjusted according to Open and Close Time.
z
OPEN: IR LED forcedly open
z
CLOSE: IR LED forcedly close
z
CAMERA: IR LED status (Open/Close) will be synchronized with
Camera day and night switching
2. SENSITIVIRY:
Here the user can manually set the sensitivity from 1-5.
The smaller the number is, the lower light of the
environment will be when the IR LED on.
3. IR LED POWER:
Here the use can choose the power mode covering:
NORMAL, MATCH and USER.
z
NORMAL: Near IR LED will be turned on when wide angle. and Far IR
LED will be turned on when small angle.
z
MATCH: The Near and Far IR LED will be turned on and off
automatically to match the zoom in and out.
z
USER: The user can manually adjust the Near and Far IR LED.
4. AUTO CONTROL:
When it is on, the IR LED will turn its power consumption
to the standby status which will effectively extend the
service life of IR LEDs. And under this mode, when
objects appear in the screen, the IR LED will turn its
power consumption back to the normal status.
5. STANDBY POWER:
When the AUTO CONTROL is on, the user can set up the
standby power here.
6. STANDBY DELAY:
Set up how long if there is not moving object, the IR LED
will turn into standby status.
