High Speed Dome Camera Introduction Manual
26
7. SENSITIVITY:
When the AUTO CONTROL is on, the user can set up the sensitivity to detect the
moving objects.
8. ENHANCED MODE:
Under normal status, press IRIS OPEN to enhance the IR LED power, when it is
turned to maximum, press IRIS OPEN continuously for 2 seconds to enter the
enhanced mode. And the whole brightness of the image will be improved. Move the
cursor to EHNANCED MODE and press IRIS to enter and select between” STATIC”
and “DYNAMIC”
9. START/STOP TIME:
Set up time for IR LED to open and close under “TIMING” of control mode.
▌
▌
IDLE
IDLE setting means if there is no command for the dome for a period of
time, the dome will run the actions as defined.
1. TIME:
Move the cursor to “TIME” and press IRIS OPEN to enter,
and move the joystick up and dome to select among 30
sec, 1 min, 5 min, 10 min and 30 min. And press IRIS
OPEN to confirm.
2.
ACTION:
Move the cursor to “ACTION” and press IRIS OPEN to
enter. Move the joystick to select the actions including”
NONE, PRESET, SCAN, SEQUENCE, PATTERN. Press
IRIS OPEN to confirm.
▌
▌
ALARM
