High Speed Dome Camera Introduction Manual
44
▌▌
AUTO CRUISE (SEQUENCE)
The dome supports 8 groups of auto cruise and each cruise
supports 32 presets. . Please check the following steps to set
up cruise.
1. SEQ NO.:
Move the cursor here and press IRIS OPEN to enter the
setup of Sequence Number. Move the joystick to select a
preset number (1-8) and press IRIS OPEN to confirm.
2. TITLE:
Move the cursor here and press IRIS OPEN to enter the
setup of Sequence Title. Check the detailed above in
DOME TITLE Settings.
3. <SEQUENCE SET>:
Move the cursor here and press IRIS OPEN to enter.
Move the cursor to EDIT and press IRIS OPEN enter edit
mode of sequence. Move the joystick left and right to
select each item.
z
When the < > is on the item NO., move joystick up or down to select
the Serial NO. of the preset in a sequence. There are up to
32 presets in each sequence.
z
When the < > is on the item PRESET, move the joystick up or down to
select the preset NO. that the user wants to add in the
sequence.
z
When the < > is on the INTERVAL, move the joystick up or down to
select the interval time between each preset.
z
When the < > is on the last item, move the joystick up or down to
select edition mode as “INS (insert)”, “ok” and “delete”.
z
Press IRIS OPEN when selecting INS to insert the settings into the
position of current Serial No.
z
Press IRIS OPEN when selecting OK to override the settings of
Current Serial No.
z
Press IRIS OPEN when selecting delete to delete the settings
of the Current Serial No.
z
Press IRIS OPEN to save all the setting and press IRIS CLOSE
to exit.
4. DELETE/START:
Move the cursor here and press IRIS OPEN to delete/start the current sequence.
