High Speed Dome Camera Introduction Manual
48
▌▌
MOTION DETECT
The user can set up 8 motion detection scenes (each scene
with 4 detecting areas) under this menu. The alarm output
will be triggered when moving objects enter these detecting
areas
1. SCENE NO.:
Move the cursor here and press IRIS OPEN to enter the
setup of Scene Number. Move the joystick to select a
preset number (1-8) and press IRIS OPEN to confirm.
2. <EDIT SCENE>:
Move the cursor here and press IRIS OPEN to enter.
Move the dome to a user-defined detecting scene. Press
IRIS OPEN to confirm.
3. <EDIT AREA>:
Move the cursor here and press IRIS OPEN to enter the
menu of AREA EDIT.
z
AREA NO.: Move the cursor here and press IRIS OPEN to enter the
setup of AREA Number. Move the joystick to select a preset
number (1-4) and press IRIS OPEN to confirm.
z
<AREA EDIT>: Move the cursor here and press IRIS OPEN to enter
the setup of AREA EDIT. The screen will display frame with Serial
No. The user can move the frame to the top left conner of the
wanted detecting area and press IRIS OPEN to confirm. Then
move the joystick to adjust the size of the detecting area and press
IRIS OPEN to confirm
z
DELETE: Move the cursor here and press IRIS OPEN to delete the
current detecting area.
z
SENSITIVITY: Move the cursor here and press IRIS OPEN to enter.
Select among LOW. MID and HIGH and press IRIS OPEN to
confirm the sensitivity.
z
DELETE SCENE: Move the cursor here and press IRIS OPEN to
delete the current scene.
z
AUX ACTIVATE: The dome can activate the alarm aux output when
detecting the moving object. Press IRIS OPEN to enter and select
between “ON” and “OFF” to activate or deactivate this function.
z
CANCEL (SEC): Here means when the alarm aux output is activated
by the detecting function, for how long it will last before the aux
output will be closed. The time ranging 1-60 Sec.
START: Move the cursor here and press IRIS OPEN to start the function of motion detection.
