High Speed Dome Camera Introduction Manual
43
▌▌
SCAN
The dome supports 8 groups of auto scan. Please check the
following steps to set up a scan.
1. SCAN NO.:
Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Number. Move the joystick to select a
preset number (1-8) and press IRIS OPEN to confirm.
2. TITLE:
Move the cursor here and press IRIS OPEN to enter the
setup of SCAN Title. Check the detailed above in DOME
TITLE settings.
3. <LEFT LIMIT>:
Move the cursor here and press IRIS OPEN to enter.
Move the dome to a defined position as left limit and
press IRIS OPEN to save this left boundary.
4. <RIGHT LIMIT>:
Move the cursor here and press IRIS OPEN to enter.
Move the dome to a defined position as right limit and
press IRIS OPEN to save this right boundary.
5. START:
Move the cursor here and press IRIS OPEN to start the
current scan.
6. SCAN SPEED:
Move the cursor here and press IRIS OPEN to set up the
scan speed ranging 1-30.
