High Speed Dome Camera Introduction Manual
19
▌▌
Reserved Preset
z
Description
Some Preset numbers are reserved to special functions.
1
<Call> [95]<Enter>
Enters into OSD menu
2
<Call> [99]<Enter>
Run Pan Scan
Default as scan 1
3
<Call> [98]<Enter>
Run Cruise(SEQ)
Default as Cruise(SEQ) 1
4
<Call> [97]<Enter>
Run Pattern
Default as Pattern 1
5
<Call> [96]<Enter>
Stop / End of set
6
<Set> [93]<Enter>
Set the Right boundary
Default as scan 1
pp: speed value 1~30
7
<Set> [92]<Enter>
Set the Left boundary
8
<Set> [87]<Enter> + <Call>[pp]<Enter>
Stop / End of setting
9 <Set>
[84]<Enter>
+
<Call>[pp]<Enter> + ……
Set the preset of cruise
pp: Preset
，
the max. 32
presets
qq: dwell time
：
1
－
60S,
Default as cruise 1
10
<Call>[96]<Enter>
End the preset setting
11 <Set>
[83]<Enter>
+
<Call>[qq]<Enter>
Set dwell time of cruising
12
<Set> [86]<Enter>
Start the pattern setting
Default as pattern 1
13
<Call>[96]<Enter>
End the pattern setting
14
<Call>[80]<Enter> +
<Call>[pp]<Enter> + <Call>[99]<Enter>
Start the qq scanning
pp: Scanning 1-8
qq: speed value
：
1-30
15 <Call>[80]<Enter>
+
<Call>[pp]<Enter> + <Set>[93]<Enter>
Set right boundary of the
pp scanning
16 <Call>[80]<Enter>
+ <Call>[pp]<Enter>
+ <Set>[87]<Enter>+ <Call>[qq]<Enter>
Set the speed value of
scanning
17 <Call>[80]<Enter>
+
<Call>[pp]<Enter> + <Call>[98]<Enter>
Start the pp cruising
pp: Cruise 1-8
qq: Presets, the max.32
presets
n
：
Dwell time 1-60s
18 <Call>[80]<Enter>
+ <Call>[pp]<Enter>
+ <Set>[84]<Enter>+ <Call>[qq]<Enter>
Set the preset of the pp
cruising.
19
<Call>[96]<Enter>
End the pp cruise setting
20 <Call>[80]<Enter>
+ <Call>[pp]<Enter>
+ <Set>[83]<Enter>+ <Call>[n]<Enter>
Set dwell time of cruising
