High Speed Dome Camera Introduction Manual
24
▌
▌
DISPLAY SETUP
Display setup allows the user to define the way to display the dome titles
on the monitor.
The displayed titles are listed as follows:
z
DOME TITLE Indicate dome
z
PRESET Indicate the dwell time for preset title
z
MOTION Indicate the dwell time for auto function titles (auto
scan/auto cruise/pattern tour)
z
ZONES Indicate the dwell time for zone titles
z
DATE/TIME
Display the current date and time
z
PAN/TILT Time to display PTZ info and zoom info
z
ALARM Time to display alarm in/out info
z
IR LED INFO Time to display IR LED info
z
PROMPT
Display prompt info
Two options for the Dome Title and Date/Time: OFF and ON
Other setup selections include:
z
OFF
Title will not be displayed when activated.
z
ON
Title will be continuously displayed when activated.
z
2 SEC
Title will be displayed for 2 seconds after activation.
z
5 SEC
Title will be displayed for 5 seconds after activation.
z
10 SEC Title will be displayed for 5 seconds after activation.
Move the cursor by joystick to the one you need to set, and press Iris Open
the item. Move the joystick select the status and press Iris Open to confirm
Titles can be placed anywhere on the monitor. This feature allows you to
customize the window of your monitor screen. To set a title position:
1. Use the joystick to position the cursor in the DISPLAY
POSITION
2. Press Iris Open.
3. Use the joystick to move the title up, down, left, or right.
4. Press Iris Open.
5. Repeat steps 1 through 4 to position other titles
6. Position the cursor at BACK or EXIT. Press Iris Open to
save settings and exit menu.
