High Speed Dome Camera Introduction Manual
40
▌▌
CAMERA (Module)
Note: the above camera menu supports
only SONY
FCB-EX1020.
Note: SCM-2270 & SCM-2370 camera
set using the embedded module itself
menu settings.
Note: CZ36SCM camera set using the
embedded module itself menu settings
The user can make adjustment for the cameras under this
menu.
1. FOCUS MODE:
AUTO FOCUS allows the camera lens to remain in focus
during zooming in, zooming out and pan/tilt movement.
Move the cursor here and press IRIS OPEN to enter.
Setup the mode: AUTO” or “OFF” and press IRIS OPEN
to confirm. When auto focus is off, the user needs to do
manual focus.
2. DIGITAL ZOOM:
Move the cursor here and press IRIS OPEN to enter.
Setup the function to be “ON” or “OFF”.
3. BACKLIGHT:
Move the cursor here and press IRIS OPEN to enter.
Setup the function to be “ON” or “OFF”.
4. PICTURE FLIP:
To set up the Tilt flip for the dome. Move the cursor here
and press IRIS OPEN to enter. Setup the function to be
“ON” or “OFF”.
5. FREEZE:
If turn on this function, the screen image will be frozen
until it is turned off. Move the cursor here and press IRIS
OPEN to enter. Setup the function to be “ON” or “OFF”.
6. ZOOM SPEED:
To set up the zoom speed of Low, Normal and high when
doing the zoom in and out. Move the cursor here and
press IRIS OPEN to enter. Move the joystick to choose
and press IRIS OPEN to confirm
7. DAY NIGHT:
To set up the day and night mode of AUTO, CLOUR and
B/W. Move the cursor here and press IRIS OPEN to
