High Speed Dome Camera Introduction Manual
20
21 <Call>[80]<Enter>
+
<Call>[pp]<Enter> + <Call>[97]<Enter>
Start the pp pattern.
pp: Pattern 1-4
22 <Call>[80]<Enter>
+
<Call>[pp]<Enter> + <Set>[86]<Enter>
Start setting of the pp
pattern.
23
<Call> [96]<Enter>
End setting of the pp
pattern.
24 <Call>
[94]<Enter>
Reset
25
<Call> [82]<Enter>
Load Default
26
<Call> [94]<Enter>
Reset
27
<Call> [71]<Enter>
Start Wiper
z
Main Functions Fast Call Up
Our IR Speed dome supports 220 preset positions. You can activate some special functions by
calling upon code number 65-99.
z
System Self-Testing
The dome will do self-testing after power up, and system status will show “Normal” if system Is
running normally. If error happens, testing result will be shown in “
○
” or “X”. “
○
” means normal
and “X” means error. Please check the according meaning as follows:
Serial NO.
1
2
3
4
5
6
Meaning Dip
Switch
Temperature
Sensor
Storage Pan Tit Camera
▌▌
General Rules of Key Operation for Menu
z
The menu items surrounded with<> always has its sub menu.
z
For aIl menu level, to go into sub menu, press OPEN key or use joystick in the right.
z
To go to up-one-level menu, press CLOSE key or use joystick in the left.
z
To move from items to item in the menu, use joystick in the Up/Down.
z
To change a value of an item, use Up/Down of the joystick in the controller.
z
Press OPEN key or use joystick in the right to save values and Press CLOSE key or use joystick in the
left to cancel Values.
