8-1
Assembly Manual: Undercarriage Installation
Revised 12.2019
Section 8: INSTALL UNDERCARRIAGE
8.1 TUBE ONTO UNDERCARRIAGE
OVERHEAD EQUIPMENT HAZARD
Secure raised equipment.
Use caution when working under tube.
1. Raise the tube to give clearance for the
undercarriage.
2. Place the undercarriage in position below
the tube.
3. Lower the tube so the Roller Slide sits in the
roller at the top of the undercarriage.
- Keep most weight supported by the winch.
Fig 241 - Move undercarriage below tube
Fig 242 - Rest tube slide on undercarriage roller
Fig 243 - Slide in roller grooves
4. Position the edge of the Slide Roller, so it
sits in the groove of the roller.
- Lower tube frame, to bear weight on roller.
- Let the Undercarriage roller lay against the
top edge of the Slide.
