4-11
Assembly Manual: Engine Cradle
Revised 12.2019
Fig 39 - Hydraulic filter fittings
Fig 40 - Hydraulic filter
Fig 41 - Filter gauge
Note:
Refer to schematic for
specifics on the hydraulic fittings.
49. Partially assemble the return fittings for the
hydraulic filter.
- Use a 1.25 x 6.25 inch hose between the
filter and 90° fitting into the reservoir.
50. Connect the filter assembly to the return
fitting at the left-side, of the reservoir.
51. Bolt the filter mount head to the bottom of
the bracket.
52. Add hose fittings to filter mount.
53. Lubricate the filter gasket. Work up, into the
threading of filter mount head.
54. Screw on filter.
55. Add the gauge to hydraulic filter mount.
- Use Loctite® 545 Thread Sealant.
6.25
