6-7
Assembly Manual: Tube
Revised 12.2019
20. Place the Undercarriage Mount Assembly
below the tube in front of Drive Box.
- Fasten it to a 6 inch tube clamp.
- Loosely secure bolts.
21. Place 2 Return Roller Brackets and their
tube clamps in position between the Drive
Box and Slide.
- Loosely secure bolts.
22. Finish placing Return Roller Brackets with
tube clamps after the Slide to the end of the
unit. Refer to Figures 139, 140 or 141
- Do not tighten bolts, yet.
6.2.2 Level Components:
IMPORTANT:
Conveyor ends must be level,
before all other components can be levelled.
23. Level Hopper, and Discharge Housing.
- If needed, shim the stands to level both
ends.
24. Level the Tube Clamp with Windguard
Mount.
- Level Heavy Duty Return Roller Assembly.
- Level Drive Box.
- Level Undercarriage Mount Bracket.
- Level all Return Roller Brackets.
25. Tighten all the bolts.
Fig 148 - Undercarriage mount assembly
Fig 149 - Level hopper
Fig 150 - Level drive box
Fig 151 - Level undercarriage slide
