6-21
Assembly Manual: Tube
Revised 12.2019
Fig 201 - Discharge windguards
Fig 202 - Windguard crossing flange on 1658-TL
6.7 COMPLETE THE TUBE
6.7.1 Install Windguards:
The lists below are for one side of the conveyor.
1640-TL windguard sizes:
- Discharge windguard 59-3/4 inch, precut
to fit.
- 32 inch guard between Discharge guard
and Slide.
- 90 inch windguard after Slide.
- 30 inch tapered windguard to Drive Box.
- 65-5/16 inch guard between Drive Box
and Hopper.
1650-TL windguard sizes:
- Discharge windguard 59-3/4 inch, precut
to fit.
- 60 inch windguard after Discharge guard.
- 100 inch windguard to Slide.
- 90 inch windguard after Slide.
- 30 inch tapered windguard to Drive Box.
- 65-5/16 inch guard between Drive Box
and Hopper.
1658-TL windguards sizes:
- Discharge windguard 59-3/4 inch, precut
to fit.
- 90 inch windguard after Discharge guard.
- 60 inch windguard.
- 100 inch windguard to Slide.
- 90 inch windguard after Slide.
- 30 inch tapered windguard to Drive Box.
- 65-5/16 inch guard between Drive Box
and Hopper.
94. Install the precut windguard at the discharge
housing.
1658-TL Note:
Mark tube flange location.
Cut out notch in guard to fit flange.
Note:
Position windguards against the
Return Roller Bracket support arm weld,
then lay it down on the arm.
