5-8
Assembly Manual: Undercarriage
Revised 12.2019
Fig 86 - Lift frame hydraulic cross tube with clamp
Fig 87 - Air hole in bottom cylinder plug
Fig 88 - Lift cylinder
Fig 89 - Breather vent
5.3.1 Install the Hydraulic Cylinder:
39. Bolt the Hydraulic Lift Upper Mount Clamp
to the Lift Frame Hydraulic Cross Tube.
- Use 1/2 x 1-1/2 inch bolts.
- Tighten these bolts.
40. Lift the cylinder with a hoist.
- Attach the base of cylinder to cross tube
bracket.
- Use 1/2 x 1-1/2 inch bolts.
- Do not tighten, yet.
41. Attach Hydraulic Lift Upper Mount Clamp
Plate around bottom of cylinder.
- Use 1/2 x 1-3/4 inch bolts to fasten the
plate to the clamp.
- Do not tighten, yet.
42. Position and centre the cylinder on its plate.
- Tighten the cylinder bolts.
IMPORTANT:
Be sure the cylinder has a breath fitting;
it is critical for proper function.
43. Insert a breather vent into the lower port of
the cylinder.
