3-2
Assembly Manual: 1600-TL Series Conveyor
Revised 12.2019
3.2 RECEIVING
The conveyor is shipped from the factory in two
crates, with the tubes strapped on top. The first
crate includes the engine cradle, the second
contains the rest of the parts. Additional larger
parts may be bundled together.
Use a forklift to unload the crate from the truck.
When the crate is unloaded:
1. Open the crate.
2. Lay out the contents on the ground.
3. Unpack the box of fasteners, clips, etc.
4. Use the packing slip as a guide. Confirm
that all listed parts and supplies have been
included in the crate, and accompanying
packages.
5. Contact the transport company and the
factory immediately if any components or
bags are missing.
3.3 PREPARE FOR ASSEMBLY
Assembly should be done in a large, open, well-
lit area. There should be access to the machine
from any side, at all times.
Two people must work on assembling the
unit. Together, they can handle large, heavy or
unwieldy components.
Always use stands, hoists, jacks, cranes,
winches and other support systems. This
equipment must have enough capacity to handle
all the components safely during the assembly
procedure.
Fig 1 - Engine cradle crate
Fig 2 - Components crate
Fig 3 - Documentation, fasteners & small parts
