5-1
Assembly Manual: Undercarriage
Revised 12.2019
Fig 60 - Axle and main frame tubes
Fig 61 - (a) Mover kit cylinder mount, (b) steering wheel tube
Section 5: UNDERCARRIAGE ASSEMBLY
While assembling the undercarriage, some
instructions state directions of left and right.
These directions are seen from standing in front
of the axle, with the main frame tubes leading
away.
-Left is the drivers-side
-Right is the passengers-side
5.1 MAIN FRAME ASSEMBLY
EQUIPMENT WEIGHT HAZARD
Use lift equipment rated to hold 2000 lb.
Never lift heavy objects alone, find help!
1. Place the axle on stands.
2. Lay undercarriage main frame tubes in
position, against brackets on axle.
- Attach using 1/2 x 1-1/2 inch bolts.
- Do not tighten yet.
3. Bolt the undercarriage main frame cross
tubes; do not tighten.
- (a) Mover Kit Lift Frame Cylinder Mount
- (b) Motor Cradle Mount
4. Measure the distance between the ends
of the main frame tubes. The inside
measurement must be 16-1/2 inch apart to
fit under the tube.
5. Tighten all the cross tube bolts, including to
the axle.
a
b
16-1/2”
Fig 62 - Main frame tube measurement
