5-16
Assembly Manual: Undercarriage
Revised 12.2019
88. Connect a 3/8 x 74 inch hose to the lower
fitting in the lock block.
89. Connect a 3/8 x 70” hose to the upper fitting.
- Add a restrictor between the hose and the
block.
90. Secure both hoses to the cross tube with a
butterfly clamp.
Fig 119 - Hydraulic hoses
116
123
Fig 120 - Valve Drawing
76
80
116
123
Note:
These two hoses will be clamped to the main
frame later in the assembly.
91. Run both hoses along the main frame tube
and up to the mover kit valves.
- Attach the 80 inch hose to the right, outer,
rear port.
- Attach the 76 inch hose to the right, outer,
front port.
92. Clamp the steering cylinder hoses from the
end of the frame arm to the rear side of the
cradle mount.
- Use self-tapping screws to fasten the
butterfly clamps.
93. Fasten the 123 inch hose to the left, outer,
rear port on the mover kit valve.
94. Connect the 116 inch hose to the left, outer,
front port.
74
70
Fig 121 - Hydraulic hoses
Fig 122 - Steering cylinder hoses
