Operating Instructions
Insulated Conductor Rail System
SinglePowerLine Program 0813
BAL0813-0007-EN
www.conductix.com
translated document
page 26 of 108
4.3
Description of the components
The SinglePowerLine 0813 Conductor Rail System consists of:
◼
Conductor rails
◼
Hanger clamps (interface to the machine of the system engineer/operator)
◼
Connectors
◼
Line feed connectors (interface to the machine of the system engineer/operator)
◼
Anchor clamps
◼
End caps/overrun caps for conductor rails
◼
Air gaps
◼
Expansion units
◼
Pickup guides
◼
Current collectors (interface to the machine of the system engineer/operator)
◼
Accessories (clamp arm, support arm bracket, clamping bracket, bracket)
The conductor rails are fastened to a straight, smooth surface provided by the customer using hanger clamps. The conductor rails
are electrically and mechanically coupled using connectors. The conductor rail is supplied with electrical energy through line feeds
that mobile consumers can continuously tap using current collectors.
Fig. 6: Aluminum with a stainless steel strip
Fig. 7: CopperECO
Fig .8: Copper
◼
Conductor rail 08131 ***
Conductor rails with PVC insulating profile as PH and PE in
nominal lengths of 5000 mm. The halogen-free PPE
+
SB is used for
higher ambient temperatures.
PE rails are green/yellow. Phase rails are yellow. The conductor
material of the conductor bars can be aluminum with a stainless
steel strip, CopperECO or copper. There are different rated
currents from 500 to 1250 A.
PH = Phase conductor
PE = Protective conductor
