Operating Instructions
Insulated Conductor Rail System
SinglePowerLine Program 0813
BAL0813-0007-EN
www.conductix.com
translated document
page 89 of 108
8
Operation
Operating the conductor rail is limited to switching the voltage supply on and off when operation is interrupted, as described in Section
8.3.
The safety information in Section 8.1 must be observed to ensure safety during operation.
8.1
Safety
DANGER!
Risk of death due to electrical shock!
Contact with components carrying electrical power can lead to death or severe injury due to
electrical shock. Danger of injury due to shock reactions, falling or being thrown across the room
due to electrical shock.
The conductor rail must not be operated under the following circumstances:
→
If the conductor rail is heavily soiled.
→
If the conductor rail is wet.
→
If parts under voltage are exposed (insulating profile or the insulation of the connecting cable
are damaged).
→
If the hanger clamp or insulation profile fail.
→
If the conductor bar falls down and contacts a conductive material.
Take the following measures:
→
Ensure proper electrical protection at all times.
→
Ensure grounding of metallic components at all times.
→
Ensuring the function of the customer's protective devices at all times.
→
Check, maintain and clean the conductor rail regularly, and repair if necessary.
WARNING!
Unauthorized personnel are at risk!
Unauthorized personnel are not familiar with the hazards in the working area.
→
The system must only be operated by trained personnel!
→
Keep unauthorized personnel away from the working area.
→
In case of doubt, address such persons and direct them away from the working area.
→
Stop working as long as unauthorized personnel are in the working area.
In order to comply with the
most important measures
for protection against hazards, the measures specified in Sections 2 and 3
must be observed. For information on foreseeable incorrect applications or unsuitable ambient conditions particularly see Sections
Fehler! Verweisquelle konnte nicht gefunden werden.
DANGER!
Risk of injury due to entrapment!
There is a risk of being trapped by moving parts when the system is in operation.
→
Do not enter the danger zones of the system during operation.
