comfortel 1400 IP Advanced Information Download Page 430

Page: 430 / 718

430

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

Settings

Providers and PBXs

Requirements:

•

Set DNS server

•

STUN server set up for the provider/PBX, if the

Activado con uso de

STUN

option has been selected

•

If the

Activado

option has been selected: the

Registrador

enabled for

the provider/PBX

Important:

Every port opening on the NAT router is a security risk.

Perform the appropriate security measures.

Activado

: NAT traversal is performed by the provider/PBX. The SIP

request also contains an "rport" part in which the IP addresses used here
(local, public) are transported.

Desactivado

: NAT traversal is not performed by the provider/PBX. The

router, which connects the Local Area Network with the Internet, should be
a properly functioning, SIP-aware router which performs NAT traversal.

Activado con uso de STUN

: NAT traversal is performed by the

provider/PBX. To achieve this, you must also enter a

Servidor STUN

under

Ajustes

Note:

Activado

is selected: if there are problems with unilateral call

connections, a STUN server should be used (

enabled when you are

using STUN

RTP NAT-Traversal

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands