comfortel 1400 IP Advanced Information Download Page 400

Page: 400 / 718

400

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

Voice Mailboxes on the PBX

Message List

Listening to Messages

Proceed as follows:

•

Using the telephone

1. Open the message list of the voice mailbox.

2. In the list field on the left, above the message list, select one of the

following options:

Todas las grabaciones

: Displays all the entries saved in the message

list.

Solo mensajes

: Displays only the messages saved in the message list.

Solo notas de voz

: Displays only the voice memos saved in the

message list.

Archivo

: Displays the voice mailbox archive.

Fetches the telefax from the archive.

Marks the telefax as already downloaded.

Marks the telefax as new.

Deletes the displayed telefax. To delete all telefaxes from the
message list, press the

Menu key

and tap on

Borrar todos

los mensajes

, then tap on

Sends the telefax to the e-mail address entered for E-mail notifi-
cation.

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands