comfortel 1400 IP Advanced Information Download Page 402

Page: 402 / 718

402

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

Voice Mailboxes on the PBX

Message List

Proceed as follows:

•

Using the telephone

1. Open the message list of the voice mail/fax box.

2. Only for voice mailboxes: In the list field on the left, above the message

list, select one of the following options:

Todas las grabaciones

: Displays all the entries saved in the message

list.

Solo mensajes

: Displays only the messages saved in the message list.

Solo notas de voz

: Displays only the voice memos saved in the

message list.

Archivo

: Displays the voice mailbox archive.

Locuciones

: Displays the saved and free announcements for the voice

mailbox.

Grabar nota de voz

: Starts the recording of a voice memo.

3. Only for fax boxes: In the list field on the left, above the message list,

select one of the following options:

Todos los fax

: Displays all telefaxes saved in the message list.

Fax enviados

: Displays only the sent telefaxes.

Fax recibidos

: Displays only the received telefaxes.

Archivo

: Displays the archive of the fax box.

4. Select a message.

5. Tap on

and enter a phone number.

6. Select one of the following options:

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands