comfortel 1400 IP Advanced Information Download Page 392

Page: 392 / 718

392

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

Voice Mailboxes on the PBX

Voice Mailbox

Note:

The default announcement and your announcements are played,

if present. The following functions are available whilst your own
announcements are being played back:

: Selects the announcement currently being played as an active

announcement.

: Jumps back to the previous announcement.

: Repeats the announcement currently being played.

: Jumps to the next announcement.

Selects the announcement that is currently being played, so you can

change it or record it. Press # to save your announcement, or * to exit
the function.

* 30

: Disables message forwarding.

* 31

: Enables message forwarding.

* 70

: Deletes all messages and voice memos.

* 99

: Records a voice memo.

Disconnect

: Ends remote access.

Note:

By dialling

while a message is being replayed, the phone

number of the caller will be displayed—provided it has been transferred.
By pressing the

key, you can initiate a callback to the caller's number.

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands