comfortel 1400 IP Advanced Information Download Page 403

Page: 403 / 718

COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.8 - Advanced Information - V02 06/2017

403

Voice Mailboxes on the PBX

Message List

mover

: Moves the message to the selected voice mail/fax box.

Copiar

: Copies the message to the selected voice mail/fax box.

Dialling from the Message List

You can return the call of a caller who left a specific message directly from
the message list.

Proceed as follows:

•

Using the telephone

1. Open the voice mailbox's message list.

2. In the list field on the left, above the message list, select one of the

following options:

Todas las grabaciones

: Displays all the entries saved in the message

list.

Solo mensajes

: Displays only the messages saved in the message list.

Solo notas de voz

: Displays only the voice memos saved in the

message list.

Archivo

: Displays the voice mailbox archive.

Locuciones

: Displays the saved and free announcements for the voice

mailbox.

Grabar nota de voz

: Starts the recording of a voice memo.

3. Select a message.

Summary of Contents for 1400 IP















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands

comfortel 1400 IP, Advanced Information

Search results

Summary of Contents for 1400 IP

Reviews:

Related manuals for 1400 IP

Brands by name

Popular brands