46
Description
Installers
ID
Installer 1
Installer 2
Installer 3
Installer 4
Master
Manufacturer
51
52
53
54
55
56
Installer type
Install. type 1
Install. type 1
Install. type 2
Install. type 2
Master
Manufacturer
Reset
Delete
ID Passwords associated with user
ID Radio controls associated with installer
Send message options
Send detailed events SMS
Send Email messages
Send digital communication
Send notification to App
3.10.2 Installers
There must be at least one active installer [Reg. 53]
The installers section allows you to configure the codes intended for installers.
STATUS/DESCRIPTION PANEL
CONFIGURATIONS PANEL
Uniquely identifies the installer code. The tick in the checkbox at the side indicates that an installer code has already been defined.
An editable, alphanumeric field; allows you to assign a name or description to the selected code. For example you might want to change “Installer
1” to “John Smith” to clearly identify the associated installer.
Uneditable alphanumeric box; describes the type of installer. The authorisations will depend on the installer type (see
“3.10.3 Access levels” on page
47
).
When you select the position of an installer with the mouse, you can immediately check whether keys or radio controls have been associated to that
installer. At the same time, it will be possible to identify precisely which keys and/or radio controls are involved.
ID
DESCRIPTION
INSTALLER TYPE
KEYS AND RADIO CONTROLS ASSOCIATION WINDOW
By default the "Master" code is 1961
Allows editing of the selected user code.
Button, allows you to remove the code for the selected position.
RESET CODE
DELETE CODE
See description
Send Message options on page. 89
.
All active devices must permit the control panel to send notification to the digital
communicator for events generated by the device itself [Reg. 16].
SEND MESSAGE OPTIONS
Summary of Contents for VEDO 2.6 Series
Page 99: ...99...
