Comelit VEDO 2.6 Series, Programming Manual

Page: 13 / 100

13
Status
Activate
Absent
Absent
Absent
1
2
3
4
ID Description
Safetouch 1
Safetouch 2
Safetouch 3
Safetouch 4
Area 2
Area 3
Area 4
Area 5
Area 6
Area 7
Area 8
Area 1
Checked areas Display tamper Display technical alarms
Area
Options
Quick activation
Quick alarms
Display areas status
Suspend due to no network
Tamper enabled
Display open zones
Display chime zones
System status display time
Unlimited Seconds 120
Tamper alarm cycles
Unlimited Cycles 0
Technical alarms cycles (bus / voltage levels)
Unlimited Cycles 0
Px key functions
P1 key function
<No function
<No function
<No function
<No function
P2 key function
P3 key function
P4 key function
Fx key functions
F1 key function
<No function
<No function
<No function
F2 key function
F3 key function
Safetouch
Buzzer
Enabled
Input
Output
Alarm
Chime Pre-alarm
Pre-alert
Key beep
Send message options
Send detailed events SMS
Send Email messages
Send digital communication
Send notification to App
Failed activation
Activation/Deactivation executed
Terminals
I1 I2 I3 RLY
In In In Out
Network parameters
IP address
Netmask
Gateway
Address acquisition mode
. . .
. . .
. . .
Static address
VIP options
Logic address 00002001
60 Streaming video timeout seconds
3.1.2 Safetouch
In the project there must be no active or isolated SafeTouch devices [Reg. 41]
For the purposes of system management, Safetouch has the same specifications and same functions as a keypad with RFID reader. Unlike on the
keypad, the keys are virtual: the characteristics of the LCD graphic display are used to represent the device's keys. When this section refers to keys,
it means virtual keys.
Selects the areas that can be controlled by the device during normal operation.
Column showing the names of the areas in the system. To edit names, see "3.6 Areas" on page 37
Allows you to choose to which areas the Tamper alarm generated by the device is sent.
AREAS PANEL
CHECKED AREAS
AREA
DISPLAY TAMPER
See description Status / ID / Description on page 87 .
STATUS / ID / DESCRIPTION
STATUS/DESCRIPTION PANEL
Allows you to choose to which areas the technical alarms generated by the device are sent.
DISPLAY TECHNICAL ALARMS