Comelit VEDO 2.6 Series, Programming Manual

Page: 85 / 100

85
5.3.22 Service voice messages
x: from 1 to 6
Indices Parameters
Configurations necessary to guarantee
Grade 2 certification
1.1.1.36.x.1 Text
The system address field must be
completed
5.3.23 Timer Types
Vedo10 x: from 1 to 4 / Vedo34 x: from 1 to 8 / Vedo68 x: from 1 to 8 / Vedo200 x: from 1 to 32
Vedo10
y: from 1 to 4 /
Vedo34
y: from 1 to 16 /
Vedo68
y: from 1 to 16 /
Vedo200
y: from 1 to 32
TIMER TYPE SCHEDULES
Indices Parameters
Configurations necessary to guarantee
Grade 2 certification
1.1.1.37.x.2.y.1 Time ON1 Timer 4 completed*
1.1.1.37.x.2.y.2 Time OFF1 Timer 4 completed*
* Timer 4 completed and linked with the two regular general events
5.3.24 Timer Model
Vedo10/Vedo34/Vedo68
x: from 1 to 30 /
Vedo200
x: from 1 to 60
Indices Parameters
Configurations necessary to guarantee
Grade 2 certification
1.1.1.39.x.1 Start day of week
Line 1 '*'
1.1.1.39.x.2 End day of week
Line 1 '*'
1.1.1.39.x.3 Start month Line 1 '*'
1.1.1.39.x.4 End month Line 1 '*'
1.1.1.39.x.5 Start date Line 1 '*'
1.1.1.39.x.6 Selection First line selected
1.1.1.39.x.7 End date Line 1 '*'
1.1.1.39.x.8 Start year
Line 1 '*'
1.1.1.39.x.9 End year
Line 1 '*'
1.1.1.39.x.10 Timer Type
Line 1 'Timer 4'
5.3.25 System Parameters
Indices Parameters
Configurations necessary to guarantee
Grade 2 certification
1.1.1.42.1.2 Customer Name
Fill in the field
1.1.1.42.1.3 System Address
Fill in the field
1.1.1.42.1.4 Network alarm delay Max 60 seconds
1.1.1.42.1.5 Battery alarm delay Max 5 minutes
1.1.1.42.1.14 Code errors <=10
1.1.1.42.1.15 Reactivation time Minimum 2 minutes
1.1.1.42.1.16 Alarm Cycles Unlimited
1.1.1.42.1.17 Fault Cycles
Unlimited
1.1.1.42.1.18 Unlimited Alarm Cycles
Selected
1.1.1.42.1.19 Unlimited fault cycles
Selected
1.1.1.42.1.20
Device locked for incorrect
code
Selected
1.1.1.42.1.23
Activation with monitoring
fault
Selected
1.1.1.42.1.24 Forcing level 3 faults Selected
1.1.1.42.1.25 Forcing level 3 sabotage
Selected
1.1.1.42.1.30 Installer always active
Deselected
1.1.1.42.1.32 IP card enable
At least one active of PSTN, GSM and IP
1.1.1.42.1.33 Audio control enable
Active if digital communicator or IP card is
not enabled
1.1.1.42.1.34 GSM card enable At least one active of PSTN, GSM and IP
1.1.1.42.1.37 PSTN enable (on board) At least one active of PSTN, GSM and IP
1.1.1.42.1.38 Failed activation fault enable Selected
1.1.1.42.1.39
Enable test for fault and
zones sabotage
Deselected
1.1.1.42.1.42
Default codes change
mandatory
Selected
5.3.26 Events to be saved
x: from 1 to 2
Indices Parameters
Configurations necessary to guarantee
Grade 2 certification
1.1.1.43.x.2 Zone Exclusion Selected
1.1.1.43.x.3 Zone Isolation Selected
1.1.1.43.x.4 Total ON
Only set selected
1.1.1.43.x.5 Partial 1 ON
Only set selected
1.1.1.43.x.6 Partial 2 ON
Only set selected
1.1.1.43.x.7 Effective activation
Only set selected
1.1.1.43.x.8 Deactivated Only set selected
1.1.1.43.x.10 Burglar Alarm Selected
1.1.1.43.x.11 24H Alarm Selected
1.1.1.43.x.12 Fire Alarm Selected
1.1.1.43.x.13 Panic Alarm Selected
1.1.1.43.x.14 Robbery Alarm
Selected
1.1.1.43.x.15 Flood alarm
Selected
1.1.1.43.x.16 Gas Alarm
Selected
1.1.1.43.x.17 Medical Alarm Selected
1.1.1.43.x.18 Zones Sabotage Tamper Selected
1.1.1.43.x.19 Siren tamper Selected
1.1.1.43.x.20 Radio device jamming Selected
1.1.1.43.x.21 Tamper App Selected
1.1.1.43.x.26 Bus I/O expansions tamper
Selected
Indices Parameters
Configurations necessary to guarantee
Grade 2 certification
1.1.1.43.x.27 Bus keypad tamper Selected
1.1.1.43.x.28 RFID tamper Selected
1.1.1.43.x.29 Safetouch tamper Selected
1.1.1.43.x.30 Touch Tamper Selected
1.1.1.43.x.31
Bus power supply station or
isolator tamper
Selected
1.1.1.43.x.32
Bus radio concentrator
tamper
Selected
1.1.1.43.x.33 Bus siren tamper Selected
1.1.1.43.x.34
Alarm communication device
tamper
Selected
1.1.1.43.x.35 IP expansion tamper Selected
1.1.1.43.x.36 IP video expansion tamper Selected
1.1.1.43.x.42
Remote communications
tamper
Selected
1.1.1.43.x.43 GSM concentrator jamming Selected
1.1.1.43.x.44 False code Selected
1.1.1.43.x.45 Zone Fault Selected
1.1.1.43.x.46 Siren fuse fault Selected
1.1.1.43.x.47 Radio control fault Selected
1.1.1.43.x.48 Power supply unit fuse fault
Selected
1.1.1.43.x.49
Power supply unit battery
fault
Selected
1.1.1.43.x.50 Radio output battery fault
Selected
1.1.1.43.x.51 Bus siren battery fault
Selected
1.1.1.43.x.52 No power supply unit network
Selected
1.1.1.43.x.53 Radio zone battery fault
Selected
1.1.1.43.x.54 Radio control battery fault Selected
1.1.1.43.x.55 Input voltage level fault Selected
1.1.1.43.x.56 Output voltage level fault Selected
1.1.1.43.x.57 Zones RX monitoring Selected
1.1.1.43.x.58 Outputs RX monitoring Selected
1.1.1.43.x.59 Output fault
Selected
1.1.1.43.x.60 Camera fault
Selected
1.1.1.43.x.61 No GSM/GPRS coverage
Selected
1.1.1.43.x.62 Telephone line fault
Selected
1.1.1.43.x.63 Failed communication fault Only set selected
1.1.1.43.x.64 Robbery zone fault Selected
1.1.1.43.x.65 Failed activation fault Only set selected
1.1.1.43.x.66 IP Expansion fault on bus Selected
1.1.1.43.x.67 Motion sensor jamming fault Selected
1.1.1.43.x.70 I/O expansion Bus Fault
Selected
1.1.1.43.x.71 Keypad Bus Fault
Selected
1.1.1.43.x.72 Reader Bus Fault
Selected
1.1.1.43.x.73 Safe Touch Bus Fault Selected
1.1.1.43.x.74 Touch Bus Fault Selected
1.1.1.43.x.75
Isolator Power Supply Unit
Bus Fault
Selected
1.1.1.43.x.76 Radio Concentrator Bus Fault Selected
1.1.1.43.x.77 Siren Bus Fault Selected
1.1.1.43.x.78
Alarm Communication Device
Bus Fault
Selected
1.1.1.43.x.79 IP Expansion Bus Fault Selected
1.1.1.43.x.80 IP Video Expansion Bus Fault Selected
1.1.1.43.x.86 Control Panel Battery Fault Selected
1.1.1.43.x.87
Control Panel Power Supply
Mains Outage
Selected
1.1.1.43.x.88 Control panel pstn fault Selected
1.1.1.43.x.89 Control panel GSM fault Selected
1.1.1.43.x.90 Control panel IP fault Selected
1.1.1.43.x.91
Control panel voice synthesis
fault
Selected
1.1.1.43.x.94
Auxiliary power supply fuse
fault
Selected
1.1.1.43.x.95 Bus power supply fuse fault Selected
1.1.1.43.x.96 Siren power supply fuse fault Selected
1.1.1.43.x.97
Control panel power supply
unit fault
Selected
1.1.1.43.x.98 Control panel bus fault Selected
1.1.1.43.x.99 Telephone line fault Selected
1.1.1.43.x.100 No GSM network Selected
1.1.1.43.x.101 No GPRS network Selected
1.1.1.43.x.102 Date lost
Selected
1.1.1.43.x.103 Inactivity
Selected
1.1.1.43.x.106 Zone test
Selected
1.1.1.43.x.107 User logged in Selected
1.1.1.43.x.108 L2 forced ON Selected
1.1.1.43.x.109 L3 forced ON Selected
1.1.1.43.x.110 Negligence Selected
1.1.1.43.x.111 Alarm log Selected
1.1.1.43.x.113 Reset alarms
Selected
1.1.1.43.x.114 Stop alarms
Selected
1.1.1.43.x.115 Stop telephone calls
Selected
1.1.1.43.x.116 Timed activation error
Selected
1.1.1.43.x.119 Technical programming Selected
1.1.1.43.x.120 Control panel in service Selected
1.1.1.43.x.123 Reset system alarms Selected
1.1.1.43.x.124 Stop system alarms Selected
1.1.1.43.x.125 Stop system telephone calls Selected