76
Safe Manager
Verification regulation...
Project
View
Tool
Windows
Help
Options
Updating firmware...
Control unit check (Real Time)
Scan System...
Send audio
Receive events log
ETH EXPANSIONS
Element Parameters
Ip card
• No Link
• No Internet
• No SD
• DHCP error
• NTP error
• DDNS error
• SMTP error
• Card presence error
• Timeout
Palip
• Fault cameras 4
• Fault cameras 3
• Fault cameras 2
• Fault cameras 1
• Database mismatch
• Configuration reading error
• SD card fault
• Timeout Keep Alive
• Absent
• Isolated
• Active
Bridge
• Input voltage abnormal
• SMTP error
• DDNS error
• NTP error
• DHCP error
• SD card error
• Internet error
• Link error (ethernet)
• Device locking in progress
• Bus error
• No input tamper
• Absent
• Isolated
• Active
4.1.1 Launch control panel check function (Real Time)
4.1.2 Control panel check (Real Time) in alarm condi-
tion, activation, command
Click on the "Tools" menu, choose "Control panel check (Real
Time)”, enter the installer code (default=001961) and press OK
to confirm.
Press "Run" to start the real time check function (press "stop"
if you want to stop scanning, press close to exit the real time
check function).
By means of the panel at top left (activations/alarms/commands)
it is possible to verify the system status in different conditions of
alarm, activation, command; below is the list of conditions that can
be verified.
Condition
Activations
Activations
• Scenario P1
• Scenario P2
• Scenario P1+P2
• Scenario 4
• Scenario 5
• Scenario 6
• Scenario 7
• Scenario 8
• Scenario 9
• Scenario 10
• Scenario 11
• Scenario 12
• Scenario 13
• Scenario 14
• Scenario 15
• Scenario 16
• Total activation
• Total deactivation
Alarms
• Burglar
• Fire
• Panic
• Robbery
• Flooding
• Gas
• Medical
Commands
• Authorise installer
• Reset alarms
• Reset phone calls
• Request support
• Stop
• Alarms
• Extraordinary
1. Click on the alarm condition, activation, command that you
want to verify (e.g.: Activations/Total activation).
2. Press "
run
" to startd the condition. In the case of activations:
it is possible to carry out forced/immediate activations by
selecting the appropriate flag.
Summary of Contents for VEDO 2.6 Series
Page 99: ...99...
