ComAp ID-Lite Global Manual Download

Page: 168 / 225

ID-FLX Lite & Telecom Global Guide

168

Setpoint group

Date/Time

Related FW

2.5.0

Range [units]

NONE, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, WEDNESDAY,

FRIDAY, SATURDAY, SUNDAY, MON-FRI, MON-SAT, MON-SUN, SAT-SUN [-]

Default value

NONE

Step

Comm object

10202

Related applications

Description

This setpoint defines

activation.

is internally linked with

. Refer to binary inputs for details.

NONE

Timer function is disabled. Default state.

MONDAY, TUESDAY, WEDNESDAY,

THURSDAY, WEDNESDAY, FRIDAY,

SATURDAY, SUNDAY

Timer is activated on daily basis.

MON-FRI, MON-SAT, SAT-SUN

Timer is activated on selected day interval.

Timer2repeat

back to List of setpoints

Setpoint group

Date/Time

Related FW

2.5.0

Range [units]

[HH:MM:SS]

Default value

Step

Comm object

10199

Related applications

Description

Display day time when Timer 2 output is activated.

Timer2 ON time

back to List of setpoints

Setpoint group

Date/Time

Related FW

2.5.0

Range [units]

1 .. 1440 [min]

Default value

Step

Comm object

10201

Related applications

Description

Adjusts duration of Timer 2 output.

Timer2Duration

back to List of setpoints

Summary of Contents for ID-Lite


































































































































































































































Search results

Summary of Contents for ID-Lite

Reviews:

Related manuals for ID-Lite

Brands by name

Popular brands

ComAp ID-Lite, Global Manual

Search results

Summary of Contents for ID-Lite

Reviews:

Related manuals for ID-Lite

Brands by name

Popular brands