2201R Mobile Tester SCPI Reference Guide
Chapter 5 System commands
47090/323
Copyright © 2016 Aeroflex Limited. All rights reserved.
57
:SYSTem:COMMunicate:TCPip:TERMinator
Syntax
:SYSTem:COMMunicate:TCPip:TERMinator <PredefExp>
Parameters
PredefExp can take on one of the following values: LF or CR or CRLF. The default is LF.
Description
The command defines the delimiter for SCPI control strings for the TCP/IP interface. See section I/O Configuration
for more details.
Query
Reads and returns the current setting of the terminator used by TCPIP as explained above.
Example
SYST:COMM:TCP:TERM CRLF sets the line terminator for SCPI commands via LAN to CR (Carriage Return) followed
by LF (Line Feed).
:SYSTem:COMMunicate:TCPip:MOUNt
Syntax
:SYSTem:COMMunicate:TCPip:MOUNt <string1> <string2>
Parameters
string1 defines the network address which is mounted as a device for remote control. The maximum allowable length
of the string is 255 characters.
string2 is the symbolic device address used in SCPI programming. The maximum allowable length of string2 is 25
characters. The default is "server".
Description
This command mounts a server disk as a 2201R device that can be used to load or save data to/from. See section I/O
Configuration for more details.
Query
Reads and returns the last settings for the mount path and the corresponding local name as explained above.
Example
:SYST:COMM:TCP:MOUNt "unixpc/disk2/results","resdir"
