manualshive.com logo in svg

COBHAM 2201R, Reference Manual

Share
Download
COBHAM 2201R Reference Manual Download Page 258

2201R Mobile Tester  SCPI Reference Guide

Chapter 10 Measurement commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

258

:MEASure:EGPRs:ARRay:RFTX:EPEAk 

Syntax

:MEASure:EGPRs:ARRay:RFTX:EPEAk <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 100. The default value for int1 is 0.

Description

Measures multiple times (set with the int1 parameter) the maximum error vector magnitude within a burst. EVM is 
indicated per cent. To read out the entire measurement results array, use the :FETCh:EGPRs:RFTX:EPEAk command.

Query

The query form of this command returns a string, containing int1 floating point real numbers with the physical 
dimension of %, representing the measurement results.
The single measurement results are separated by commas.

Example

:MEAS:EGPRs:ARR:RFTX:EPEAk 5
:FETC:EGPRs:RFTX:EPEAk?
The maximum error vector magnitude measurement is performed five times. The measurement results are stored 
internally and read by the FETC command. An example of the string returned is: "6.33,8.53,11.97,9.41,10.79".

:MEASure:EGPRs:ARRay:RFTX:ENFTh 

Syntax

:MEASure:EGPRs:ARRay:RFTX:ENFTh <int1>

Parameters

<int1> is an integer.
The minimum value for <int1> is 0, the maximum value is 100. The default value for <int1> is 0.

Description

Measures multiple times (set with the <int1> parameter) the error vector magnitude that is not exceeded by 95% of 
the symbols of a burst. The 95% EVM is shown
in %. To read out the entire measurement results array, use the :FETCh:EGPRs:RFTX:ENFTh command.

Query

The query form of this command returns a string, containing <int1> floating point real numbers with the physical 
dimension of %, representing the measurement results.
The single measurement results are separated by commas.

Example

:MEAS:EGPRs:ARR:RFTX:ENFTh 5
:FETC:EGPRs:RFTX:ENFTh?
The maximum error vector magnitude measurement is performed five times. The measurement results are stored 
internally and read by the FETC command. An example of the string returned is: "4.33,5.53,1.97,3.41,2.79".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands