manualshive.com logo in svg

COBHAM 2201R, Reference Manual

Share
Download
COBHAM 2201R Reference Manual Download Page 192

2201R Mobile Tester  SCPI Reference Guide

Chapter 10 Measurement commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

192

:MEASure:GSM[:CONTinuous]:RFTX:PPEAk

Syntax

:MEASure:GSM[:CONTinuous]:RFTX:PPEAk

Parameters

There are no parameters.

Description

Starts a continuous measurement of the peak phase error. To read out the latest measurement result, use the 
:FETCh:GSM:RFTX:PPEAk command.

Query

The query form of this command starts the measurement and returns a measurement result value as soon as the first 
measurement has been completed. The string delivered back contains one floating point real number with the 
physical dimension of degrees.

Example

:MEASure:GSM:CONTinuous:RFTX:PPEAk?
The string returned is: "5.13".
:MEASure:GSM[:CONTinuous]:RFTX:PRMS

:MEASure:GSM[:CONTinuous]:RFTX:PRMS

Syntax

:MEASure:GSM[:CONTinuous]:RFTX:PRMS

Parameters

There are no parameters.

Description

Starts a continuous measurement of the root-mean square valued (RMS) phase error. To read out the latest 
measurement result, use the :FETCh:GSM:RFTX:PRMS command.

Query

The query form of this command starts the measurement and returns a measurement result value as soon as the first 
measurement has been completed. The string delivered back contains one floating point real number with the 
physical dimension of degrees.

Example

:MEASure:GSM:CONTinuous:RFTX:PRMS?
The string returned is: "1.54".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands