manualshive.com logo in svg

COBHAM 2201R, Reference Manual

Share
Download
COBHAM 2201R Reference Manual Download Page 14

2201R Mobile Tester  SCPI Reference Guide

 

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

14

Purpose and scope

The purpose of this guide is to help you successfully use the 2201R Mobile Tester’s features and capabilities. This 
guide includes a description of the general remote control operation and a list of commands for remote control of 
the 2201R Mobile Tester.

Assumptions

This guide is intended for intermediate and experienced users who want to use the 2201R Mobile Tester effectively 
and efficiently. We are assuming that you have basic computer experience and are familiar with basic 
telecommunication concepts and terminology.

Related information

Use this guide in conjunction with the following information:

•

2201R Mobile Tester Getting Started
document number 47090/321

•

2201R Mobile Tester User Guide
document number 47090/322

•

2201R Mobile Tester Software Release Notes
document number 47090/324.

Technical assistance 

If you need assistance or have questions related to the use of this product, call Cobham’s support. Contact numbers 
are given at the end of this document.

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands