manualshive.com logo in svg

COBHAM 2201R, Reference Manual

Share
Download
COBHAM 2201R Reference Manual Download Page 264

2201R Mobile Tester  SCPI Reference Guide

Chapter 11 Fetch commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

264

GSM commands

:FETCh:GSM:RFTX:GROup?

Syntax

:FETCh:GSM:RFTX:GROup?

Parameters

There are no parameters.

Description

There is solely a query form of this command available.

Query

The query form of this command returns the latest measurement result values of the sequence of RF TX 
measurements as specified with the :CONF:MEAS:GRO:RFTX command and measured with the 
:MEAS:GSM[:ARRay]:RFTX:GROup command. The string returned contains the related measurement result values. The 
type of the measurement result values (i.e. floating point real numbers, integers or boolean numbers) depends on the 
kind of measurements. The order of the measurement result values within the string is as described below for the 
:FETCh:GSM:RFTX:ALL command.

Example

:CONF:MEAS:GRO:RFTX POW,PRMS
:MEAS:GSM:RFTX:GRO
:FETCh:GSM:RFTX:GROup?
In this example, the group of measurements is defined by a power measurement combined with a RMS phase error 
measurement. The values returned in this example are:
"4.53,9.98".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands