COBHAM 2201R Reference Manual Download Page 172

Page: 172 / 295

2201R Mobile Tester SCPI Reference Guide

Chapter 9 Call commands

47090/323

172

:CALL:GSM:MSINfo:IMEI

Syntax

:CALL:GSM:MSINfo:IMEI

Parameters

There are no parameters.

Description

This query delivers back the international mobile equipment identity as stored inside the mobile (the so-called serial
number).

Query

There is only a query form of this command available. The query delivers back a string.

Example

:CALL:GSM:MSINfo:IMSI?
The string delivered back: "520040190000430".

:CALL:GSM:MSINfo:IMEI:SV

Syntax

:CALL:GSM:MSINfo:IMEI:SV

Parameters

There are no parameters.

Description

This query delivers back the international mobile equipment identity and the software version number as stored
inside the mobile.

Query

There is only a query form of this command available. The query delivers back a string.

Example

:CALL:GSM:MSINfo:IMSI:SV?
The string delivered back:
"52004019000043-0(01)".
The first part is the IMEI with the calculated check digit after the hyphen; the string in brackets indicates the software
version reported over the air interface.

Summary of Contents for 2201R








































































































































































































































































































Search results

Summary of Contents for 2201R

Reviews:

Brands by name

Popular brands

COBHAM 2201R, Reference Manual

Search results

Summary of Contents for 2201R

Reviews:

Brands by name

Popular brands