manualshive.com logo in svg

COBHAM 2201R, Reference Manual

Share
Download
COBHAM 2201R Reference Manual Download Page 260

2201R Mobile Tester  SCPI Reference Guide

Chapter 10 Measurement commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

260

:MEASure:EGPRs:ARRay:RFTX:LENGth 

Syntax

:MEASure:EGPRs:ARRay:RFTX:LENGth <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 100. The default value for int1 is 0.

Description

Measures multiple times (set with the int1 parameter) the burst length. To read out the entire measurement results 
array, use the :FETCh:EGPRs:RFTX:LENGth command.

Query

The query form of this command returns a string, containing int1 floating point real numbers with the physical 
dimension of microseconds, representing the measurement results. 
The single measurement results are separated by commas.

Example

:MEAS:EGPRs:ARR:RFTX:LENG 5 
:FETC:EGPRs:RFTX:LENG?
The measurement of the burst length is performed five times. The measurement results are stored internally and read 
by the FETC command. An example of the string returned is: "556.4,557.2,558.2,557.8,556.5".

:MEASure:EGPRs:ARRay:RFTX:POWer 

Syntax

:MEASure:EGPRs:ARRay:RFTX:POWer <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 100. The default value for int1 is 0.

Description

Measures multiple times (set with the int1 parameter) the burst peak power. To read out the entire measurement 
results array, use the :FETCh:EGPRs:RFTX:POWer command.

Query

The query form of this command returns a string, containing int1 floating point real numbers with the physical 
dimension of dBm, representing the measurement results. 
The single measurement results are separated by commas.

Example

:MEAS:EGPRs:ARR:RFTX:POW? 5 
An example of the string returned is: "11.22,11.09,11.21,11.14,10.99".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands