manualshive.com logo in svg

COBHAM 2201R, Reference Manual

Share
Download
COBHAM 2201R Reference Manual Download Page 201

2201R Mobile Tester  SCPI Reference Guide

Chapter 10 Measurement commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

201

:MEASure:GSM[:CONTinuous]:RFRX:BER:CII

Syntax

:MEASure:GSM[:CONTinuous]:RFRX:BER:CII

Parameters

There are no parameters.

Description

Starts a continuous measurement of the (nonresidual) bit error ratio on the class II bits. To read out the latest 
measurement result, use the :FETCh:GSM:RFRX:BER:CII command.
Notes: 
- The number of samples to be used for testing can be set, using the :CONF:GSM:BER:COUNt command.

Query

The query form of this command starts the measurement and returns a measurement result value as soon as the first 
measurement has been completed. The string delivered back contains one floating point real number, representing 
the bit error ratio.

Example

:MEAS:GSM:CONT:RFRX:BER:CII?
Measurement result string delivered back: 
"0.2".

:MEASure:GSM[:CONTinuous]:RFRX:BER:CRC

Syntax

:MEASure:GSM[:CONTinuous]:RFRX:BER:CRC

Parameters

There are no parameters.

Description

Starts a continuous measurement of the (non-residual) bit error ratio on the class II bits. To read out the latest 
measurement result, use the :FETCh:GSM:RFRX:BER:CII command.
Notes 
- The number of samples to be used for testing can be set using the :CONF:GSM:BER:COUNt command.

Query

The query form of this command starts the measurement and returns a measurement result value as soon as the first 
measurement has been completed. The string delivered back contains one floating point real number, representing 
the bit error ratio.

Example

:MEAS:GSM:RFRX:BER:CRC?
Measurement result string delivered back in this example: 
"0.2".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands