manualshive.com logo in svg

COBHAM 2201R, Reference Manual

Share
Download
COBHAM 2201R Reference Manual Download Page 132

2201R Mobile Tester  SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

132

:CONFigure:GPRS:MSTAtion:DRX 

Syntax

:CONFigure:GPRS:MSTAtion:DRX <int1>

Parameters

int1 is an integer. 
The minimum value for int1 is 0, the maximum value is 7. The default value for int1 is 0.

Description

This command sets the BS-PA-MFRMS parameter, broadcast in the control channel description information element. 
This parameter is used for discontinuous reception (DRX).
Note: The value entered here is coded according to the following scheme: the number of multiframes used is the 
number entered here plus 2. This means that the default value (0) leads to a DRX period of two multiframes.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:MSTAtion:DRX 2
:CONF:GPRS:MSTA:DRX?
Value returned: "2", resulting in a DRX period of four multiframes.

:CONFigure:GPRS:MSTAtion:TADVance 

Syntax

:CONFigure:GPRS:MSTAtion:TADVance <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 63. The default value for int1 is 0.

Description

This command sets the timing advance for the mobile under test to use. The current setting of the timing advance is 
broadcast to the mobile in the SACCH physical header.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:MSTAtion:TADVance 12
:CONF:GPRS:MSTA:TADV?
Value returned: "12".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands