CleaverBrooks ADAC 1000, Operation Manual

Page: 98 / 140

APPENDIX A - Variable Frequency Drive Parameters
A-4 Part No. 750-386
184 Power Loss Mode 0 Coast
185 Power Loss Time 5 0.5 Secs
186 Power Loss Level Read-Only
187 Load Loss Level 2000 200.0%
188 Load Loss Time 0 0 Secs
189 Shear Pin Time 0 0 Secs
* 190 Direction Mode 2 Reverse Dis
191 Reserved Read-Only
192 AutoMan Cnfg 1 XXXXXXXX XXXXXXX1
193 Man Ref Preload 0 Disabled
194 Save MOP Ref 0 XXXXXXXX XXXXXX00
195 MOP Rate 10 1.0 Hz/s
* 196 Param Access Lvl 1 Advanced
197 Reset To Defaults 0 Ready
198 Load Frm Usr Set 0 Ready
199 Save To User Set 0 Ready
200 Reset Meters 0 Ready
201 Language 1 English
202 Voltage Class 3 Based on Drive Cat No.
203 Drive Checksum Read-Only
204 Dyn UsrSet Cnfg 0 XXXXXXXX XXXXXX00
205 Dyn UsrSet Sel 0 XXXXXXXX XXXXXX00
206 Dyn UserSet Actv 0 XXXXXXXX XXXXXX00
207 Reserved Read-Only
208 Reserved Read-Only
209 Drive Status 1 Read-Only
210 Drive Status 2 Read-Only
211 Drive Alarm 1 Read-Only
212 Drive Alarm 2 Read-Only
213 Speed Ref Source Read-Only
214 Start Inhibits Read-Only
215 Last Stop Source Read-Only
216 Dig In Status Read-Only
217 Dig Out Status Read-Only
218 Drive Temp Read-Only
219 Drive OL Count Read-Only
220 Motor OL Count Read-Only
221 Mtr OL Trip Time Read-Only
222 Drive Status 3 Read-Only
223 Status 3 @ Fault Read-Only
224 Fault Frequency Read-Only
225 Fault Amps Read-Only
226 Fault Bus Volts Read-Only
227 Status 1 @ Fault Read-Only
228 Status 2 @ Fault Read-Only
229 Alarm 1 @ Fault Read-Only
230 Alarm 2 @ Fault Read-Only
231 Reserved Read-Only
232 Reserved Read-Only
233 Reserved Read-Only
234 Testpoint 1 Sel 499 499
235 Testpoint 1 Data Read-Only