CleaverBrooks ADAC 1000, Operation Manual

Page: 16 / 140

Chapter 2 — System Components
2-6 Part No. 750-386
• Email or texting of ADAC alarms to plant or service personnel
Ethernet/IP is also used for certain control functions. With a C-B
Master Panel, individual boiler controllers can be networked with
the ADAC, providing a single BAS interface for multiple boilers and
one ADAC system. Additional boiler room control functions can also
be incorporated into the Master controller.
2.1.4 - USB
USB communications are used to connect a laptop computer to the
PLC for diagnostic purposes. The HMI has 2 USB ports that may be
used for file transfer.
The HMI USB ports also support keyboard and mouse input.
2.1.5 - Sensor Inputs
• Steam Pressure Transmitter for DA tanks (Fig. 2-4); mounted in
steam space. This transmitter provides a sensor input to the ADAC
Figure 2-4 PLC Ethernet
Connection
Figure 2-5 PLC USB connection