CleaverBrooks ADAC 1000, Operation Manual

Page: 116 / 140

APPENDIX A - Variable Frequency Drive Parameters
A-22 Part No. 750-386
A.4 - PF 753
All IO wiring to module in Port 5 24V IO Module - 20-750-2262C-2R = Port 5
Set Input mode jmpers Ai0 & Ai1 to Current Mode (Port 5)
PowerFlex 753 Drive - ADAC 1000 NOTES
Par. No. Parameter Name Raw Value Real Value
Drive (Port 0) Monitor File
1 Output Freq Read-Only
2 Commanded SpdRef Read-Only
3 Mtr Vel Fdbk Read-Only
4 Commanded Trq Read-Only
5 Torque Cur Fdbk Read-Only
6 Flux Cur Fdbk Read-Only
7 Output Current Read-Only
8 Output Voltage Read-Only
9 Output Power Read-Only
10 Output Powr Fctr Read-Only
11 DC Bus Volts Read-Only
12 DC Bus Memory Read-Only
13 Elapsed MWH Read-Only
14 Elapsed KWH Read-Only
15 Elapsed Run Time Read-Only
16 Elpsd Mtr MWHrs Read-Only
17 Elpsd Rgn MWHrs Read-Only
18 Elpsd Mtr kWHrs Read-Only
19 Elpsd Rgn kWHrs Read-Only
20 Rated Volts Read-Only
21 Rated Amps Read-Only
22 Rated kW Read-Only
Drive (Port 0) Motor Control
* 25 Motor NP Volts Drive Rating Motor Nameplate
* 26 Motor NP Amps Drive Rating Motor Nameplate
* 27 Motor NP Hertz Drive Rating Motor Nameplate
* 28 Motor NP RPM Drive Rating Motor Nameplate
* 29 Mtr NP Pwr Units 0 Horsepower
* 30 Motor NP Power Drive Rating Motor Nameplate
* 31 Motor Poles 4 2 If motor RPM =3600 Motor Poles = 2
35 Motor Ctrl Mode Induction SV 1 If motor RPM =1750 Motor Poles = 4
36 Maximum Voltage Drive Rating From Drive Nameplate
* 37 Maximum Freq 60
38 PWM Frequency Drive Rating 2
40 Mtr Options Cfg
42 Bus Utilization 95%
43 Flux Up Enable 1 Automatic
44 Flux Up Time 0.0000 Secs
45 Flux Down Ki 0.20
46 Flux Down Kp 150.0
47 Econ At Ref Ki 305.0
48 Econ AccDec Ki 200.0
49 Econ AccDec Kp 100.0 V/A
50 Stability Filter 5162.22 Secs
51 Stab Volt Gain 5322.22