CleaverBrooks ADAC 1000, Operation Manual

Page: 108 / 140

APPENDIX A - Variable Frequency Drive Parameters
A-14 Part No. 750-386
63 Flux Current Ref 750 Based on Drive Rating
64 Ixo Voltage Drop Read-Only Based on Drive Rating
66 Autotune Torque 500 50.0%
67 Inertia Autotune 0 Ready
69 Start/Acc Boost 46 Based on Drive Rating
70 Run Boost 46 Based on Drive Rating
71 Break Voltage 1150 [Motor NP Volts] × 0.25
72 Break Frequency 150 [Motor NP Volts] × 0.25
79 Speed Units 0 Hz
80 Feedback Select 0 Open Loop
81 Minimum Speed 0 0.0 Hz
* 82 Maximum Speed 600 60.0 Hz
83 Overspeed Limit 0 0.0 Hz
84 Skip Frequency 1 0 0.0 Hz
85 Skip Frequency 2 0 0.0 Hz
86 Skip Frequency 3 0 0.0 Hz
87 Skip Freq Band 0 0.0 Hz
88 Speed/Torque Mode 1 Speed Reg
90 Speed Ref A Sel 2 Analog In 2
* 91 Speed Ref A Hi 600 60.0 Hz
92 Speed Ref A Lo 0 0.0 Hz
93 Speed Ref B Sel 11 Preset Spd1
94 Speed Ref B Hi 600 60.0 Hz
95 Speed Ref B Lo 0 0.0 Hz
96 TB Man Ref Sel 1 Analog In 1
97 TB Man Ref Hi 600 60.0 Hz
98 TB Man Ref Lo 0 0.0 Hz
99 Pulse Input Ref Read-Only
100 Jog Speed 1 100 10.0 Hz
* 101 Preset Speed 1 600 60.0 Hz
102 Preset Speed 2 100 10.0 Hz
103 Preset Speed 3 200 20.0 Hz
104 Preset Speed 4 300 30.0 Hz
105 Preset Speed 5 400 40.0 Hz
106 Preset Speed 6 500 50.0 Hz
107 Preset Speed 7 600 60.0 Hz
108 Jog Speed 2 100 10.0 Hz
116 Trim % Setpoint 0 0.0%
117 Trim In Select 2 Analog In 2
118 Trim Out Select 0 XXXXXXXX XXXXXX00
119 Trim Hi 600 60.0 Hz
120 Trim Lo 0 0.0 Hz
121 Slip RPM @ FLA 360 Based on [Motor NP RPM
122 Slip Comp Gain 400 40
123 Slip RPM Meter Read-Only
124 PI Configuration 0 XXXXXXXX 00000000
125 PI Control 0 XXXXXXXX XXXXX000
126 PI Reference Sel 0 PI Setpoint
127 PI Setpoint 500 50.0%
128 PI Feedback Sel 0 PI Setpoint
129 PI Integral Time 200 2.00 Secs
130 PI Prop Gain 100 1.00